🇰🇷 한글 설명
Linux 커널의 JFFS2 파일 시스템에서 xattr 노드가 eraseblock의 크기를 초과하여 오버플로우를 발생시키는 취약점입니다. 이로 인해 파일 시스템이 손상되거나 KASAN slab-out-of-bounds 오류와 같은 커널 크래시가 발생할 수 있습니다.
💡 쉬운 설명
파일 시스템의 특정 데이터를 저장할 때 정해진 공간보다 더 큰 데이터를 넣으려고 시도하여 시스템이 고장 나는 문제입니다. 이 과정에서 메모리 오류가 발생해 컴퓨터가 갑자기 멈추거나 꺼질 수 있습니다.
🇺🇸 원문 (English)
In the Linux kernel, the following vulnerability has been resolved:
jffs2: prevent xattr node from overflowing the eraseblock
Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.
Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:
jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead
This breaks the filesystem and can lead to KASAN crashes such as:
BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
📍 영향받는 시스템
Linux kernel (JFFS2 파일 시스템을 사용하는 시스템)
⚔️ 공격 벡터
조작된 xattr(확장 속성) 값을 설정하는 시스템 호출을 통해 발생
🛡️ 대응 방법
Linux 커널을 최신 보안 패치가 적용된 버전으로 업데이트
🔧 검증 코드
출력된 커널 버전이 취약점이 해결된 패치 버전 이후인지 확인합니다.