🇰🇷 한글 설명
Linux 커널의 af_key 모듈에서 IPComp 상태를 처리할 때 alg_key_len 필드를 초기화하지 않아 발생하는 취약점입니다. 이로 인해 XFRM_MSG_MIGRATE 과정에서 초기화되지 않은 슬랩 데이터를 읽어 메모리 범위를 벗어나는(out-of-bounds) 읽기 오류가 발생할 수 있습니다.
💡 쉬운 설명
컴퓨터의 네트워크 설정 정보를 복사하는 과정에서, 초기화되지 않은 쓰레기 값을 데이터 길이로 잘못 인식하여 메모리의 허용된 범위를 넘어 읽어버리는 문제입니다. 이로 인해 시스템이 불안정해지거나 오류가 발생할 수 있습니다.
🇺🇸 원문 (English)
In the Linux kernel, the following vulnerability has been resolved:
net: af_key: initialize alg_key_len for IPComp states
pfkey_msg2xfrm_state() handles the IPComp (SADB_X_SATYPE_IPCOMP) case by
allocating x->calg and copying only the algorithm name:
x->calg = kmalloc_obj(*x->calg);
if (!x->calg) {
err = -ENOMEM;
goto out;
}
strcpy(x->calg->alg_name, a->name);
x->props.calgo = sa->sadb_sa_encrypt;
Unlike the authentication (x->aalg) and encryption (x->ealg) branches of
the same function, the compression branch never initializes
calg->alg_key_len. IPComp carries no key and the allocation only
reserves sizeof(struct xfrm_algo) (i.e. no room for a key), so the field
is left containing uninitialized slab data.
calg->alg_key_len is later used as a length by xfrm_algo_clone() when an
IPComp state is cloned during XFRM_MSG_MIGRATE:
xfrm_state_migrate()
xfrm_state_clone_and_setup()
x->calg = xfrm_algo_clone(orig->calg);
kmemdup(orig, xfrm_alg_len(orig));
where xfrm_alg_len() returns sizeof(*alg) + (alg_key_len + 7) / 8. With
a non-zero garbage alg_key_len, kmemdup() reads past the end of the
68-byte calg object. Adding an IPComp SA via PF_KEY and then migrating
it triggers (net-next, KASAN, init_on_alloc=0):
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x44/0x60
Read of size 4164 at addr ff11000025a74980 by task diag2/9287
CPU: 3 UID: 0 PID: 9287 Comm: diag2 7.1.0-rc6-g903db046d557 #1
Call Trace:
<TASK>
dump_stack_lvl+0x10e/0x1f0
print_report+0xf7/0x600
kasan_report+0xe4/0x120
kasan_check_range+0x105/0x1b0
__asan_memcpy+0x23/0x60
kmemdup_noprof+0x44/0x60
xfrm_state_migrate+0x70a/0x1da0
xfrm_migrate+0x753/0x18a0
xfrm_do_migrate+0xb47/0xf10
xfrm_user_rcv_msg+0x411/0xb50
netlink_rcv_skb+0x158/0x420
xfrm_netlink_rcv+0x71/0x90
netlink_unicast+0x584/0x850
netlink_sendmsg+0x8b0/0xdc0
____sys_sendmsg+0x9f7/0xb90
___sys_sendmsg+0x134/0x1d0
__sys_sendmsg+0x16d/0x220
do_syscall_64+0x116/0x7d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 9287:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
pfkey_add+0x2652/0x2ea0
pfkey_process+0x6d0/0x830
pfkey_sendmsg+0x42c/0x850
__sys_sendto+0x461/0x4b0
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0x116/0x7d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ff11000025a74980
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 0 bytes inside of
allocated 68-byte region [ff11000025a74980, ff11000025a749c4)
Depending on the uninitialized value the same field can instead request
an oversized kmemdup() allocation and make the migration clone fail.
The XFRM netlink path is not affected: verify_one_alg() rejects an
XFRMA_ALG_COMP attribute shorter than xfrm_alg_len(), so a calg added via
XFRM_MSG_NEWSA is always self-consistent.
Initialize calg->alg_key_len to 0, matching the aalg/ealg branches.
📍 영향받는 시스템
Linux kernel (net: af_key 관련 모듈 사용 시)
⚔️ 공격 벡터
PF_KEY를 통해 IPComp SA를 추가한 후 XFRM_MSG_MIGRATE를 트리거하여 메모리 범위를 벗어난 읽기 유도
🛡️ 대응 방법
Linux 커널을 최신 보안 패치가 적용된 버전으로 업데이트하여 calg->alg_key_len이 0으로 초기화되도록 수정
🔧 검증 코드
출력된 커널 버전이 해당 취약점이 수정된 패치 버전 이후인지 확인합니다.